Arc Raiders DMA Cheats: The Complete 2026 Setup Guide
In This Article
Arc Raiders has arrived and it is already one of the most talked-about extraction shooters of 2026. Developed by Embark Studios — the team behind The Finals — Arc Raiders drops squads of three into a massive open world overrun by autonomous robotic Arc enemies, where you loot, fight, and extract against both the AI threat and competing squads. The gameplay loop is deep, the stakes are high, and losing a run means losing everything you were carrying. In a game where positioning and information are everything, a reliable DMA cheat gives you a decisive edge that no amount of mechanical skill can fully replicate.
This guide covers everything you need to know about running Arc Raiders DMA cheats in 2026: what hardware you need, how to set it up, which features matter most in this specific game, and how to configure them for the extraction-shooter meta. If you already know what DMA is and you are ready to get into the specifics, you are in the right place.
What Makes Arc Raiders Different From Other Shooters
Most extraction shooters pit players against players. Arc Raiders adds a third faction: the Arc itself. These robotic enemies range from lightweight scouts to heavy-armoured walkers and airborne drones, all patrolling fixed and dynamic routes across the map. A squad that blunders into a patrol gets shredded fast — even good players die to Arc enemies if they are not paying attention to positioning. This dual threat (players and AI) is what makes Arc Raiders genuinely brutal for solos and squads alike, and it is exactly why standard software cheats fall apart here.
Software-based ESP and aimbot tools hook directly into game memory on the same PC that runs Arc Raiders. The game's anti-cheat solution monitors memory access patterns, DLL injections, and suspicious process behaviour in real time. Because Arc Raiders was built from the ground up with competitive integrity in mind, its anti-cheat is aggressive and receives near-weekly definition updates. Software tools that worked at launch were detected within days. DMA hardware changes the equation entirely: the cheat reads game memory from a completely separate machine over a PCIe bus, leaving zero footprint on the game PC.
Beyond anti-cheat, Arc Raiders' dual-threat environment means you need more than a simple player ESP. You need visibility into Arc enemy positions, patrol routes, and aggro states — information that transforms suicidal rotations into controlled movements. Our DMA solution is built specifically for Arc Raiders and tracks both threats simultaneously.
What You Get with Arc Raiders DMA
Hardware Requirements
DMA cheats require two machines: a game PC running Arc Raiders and an attack PC running the cheat software. The DMA card bridges the two, sitting in the game PC's PCIe slot and presenting itself as an ordinary device while the attack PC reads memory through it. Here is what you need:
Always completely power off your game PC — not sleep or hibernate, but a full shutdown — before inserting or removing the DMA card. Hot-plugging a PCIe device can corrupt the slot, damage the card, or in rare cases damage the motherboard. Take the thirty seconds to do it properly.
Step-by-Step Setup
The setup process is straightforward. Most users are in-game within 25 minutes of opening the box. Follow these steps in order and do not skip the verification step — it will save you debugging time later.
Feature Deep-Dive
Knowing what each feature does is one thing. Knowing how to configure it for Arc Raiders' specific gameplay loop is what separates players who use DMA effectively from those who just run everything on max and still die. Here is the breakdown.
Player ESP
Player ESP in Arc Raiders works differently from arena shooters because encounters tend to be longer-range and squads spend more time spread out across the map. You rarely want every player ESP element enabled at once — the visual noise at distance is counterproductive. These are the key settings to tune:
| Setting | Recommended Value | Notes |
|---|---|---|
| ESP Draw Distance | 450 m | Beyond 500 m, labels cluster and become unreadable. 450 m gives you time to react without clutter. |
| Health Bar Display | On (threshold < 80%) | Show health bars only when players are below 80% HP. Reduces noise during passive rotations. |
| Skeleton Lines | Off beyond 150 m | Skeleton rendering at long range is visual noise. Switch to box ESP at range, skeleton up close. |
| Name Tags | On | Useful for tracking which squad members you have spotted. Pairs with the squad grouping colour feature. |
| Downed State Indicator | On | Knowing a player is downed vs. standing changes your priority targeting. Always keep this enabled. |
Robot / AI ESP — The Arc Raiders Differentiator
This is the feature that makes Arc Raiders DMA genuinely different from any other extraction shooter cheat on the market. The game's Arc enemies are not scripted props — they are proper AI agents with patrol states, aggro radii, and escalation behaviour. A Patrol in idle state will ignore you if you stay outside its detection cone. An Alerted patrol will actively hunt you. A Swarmed zone — where you or another squad has drawn heavy Arc response — is essentially a death trap for anyone rotating through without warning.
Our AI ESP reads the aggro state variable directly from memory and colour-codes entities accordingly: green for idle, orange for alerted, red for aggro. Drone types are shown with a distinct icon because their detection range differs significantly from ground units. Heavy Arc enemies (the walking tank variants) have a separate distance warning that triggers at 200 m because their engagement range extends further than players expect.
In practice, this means you can plan your loot route to thread between patrols, intentionally funnel enemy squads into Arc-heavy zones, and know exactly when it is safe to make noise. Players who understand how to manipulate the Arc threat go from dying 60% of runs to extracting 80% of runs. That is the value of AI ESP in this game specifically.
Aimbot
| Setting | Recommended Value | Notes |
|---|---|---|
| Smoothing | 12–16 | Higher smoothing looks more human. Arc Raiders engagements are rarely point-blank, so smoothed tracking is appropriate. |
| Bone Target | Chest (default) / Head (toggle) | Chest targeting at range, head toggle for close-range finishes. Chest is more forgiving at distance and looks natural in killcams. |
| FOV Radius | 65–80 px | Keep the aimbot FOV tight. A large FOV snaps across the screen visibly and looks suspicious in any recording. |
| Target Priority | Nearest / Lowest HP | Nearest works well in most situations. Lowest HP is useful when pushing downed players to secure kills before their team rezzes. |
| AI Target Toggle | Separate keybind | Bind AI targeting to a separate key so you can flip it on when farming Arc enemies and off during PvP engagements without changing other settings. |
Solo play: tighten the aimbot FOV to 55 px and enable Lowest HP targeting — you cannot afford drawn-out fights. Increase ESP draw distance to 600 m so you get maximum warning time on incoming squads. Squad play: loosen smoothing to 18 and prioritise Nearest targeting so your aimbot assists during chaotic close-range scrambles without fighting your teammates for angles. Turn on Extraction Zone radar for your whole squad's benefit — sharing callouts from it wins games.
Anti-Cheat Notes for Arc Raiders
Arc Raiders uses a proprietary kernel-level anti-cheat from Embark combined with a cloud-based statistical analysis backend. The kernel component scans for memory access patterns, loaded modules, and device driver anomalies at boot and during play. The statistical backend flags accounts with performance metrics that fall outside human norms — extraordinary accuracy rates, superhuman reaction times, or suspiciously perfect loot routing all contribute to a risk score over time.
DMA hardware addresses the first threat entirely. Because the cheat software runs on a separate physical machine and communicates through a PCIe bus that appears as benign hardware to the game PC, the kernel anti-cheat finds nothing to flag. There are no injected DLLs, no foreign processes, no suspicious memory handles — because nothing is happening on the game PC at all. From the game's perspective, you are just a player with a standard PCIe device installed.
The statistical backend is a different matter. No software can protect you from account-level statistical analysis if you play in a way that is obviously superhuman. Use our aimbot smoothing settings, keep your extraction success rate at a believable level (around 70–80% is fine; 99% is a red flag), and do not go from an average player to a top-500 leaderboard player in 48 hours. Play naturally in terms of outcomes, even if your moment-to-moment performance is assisted.
Arc Raiders patches frequently and each patch can change memory offsets. Always check the DMA Solutions status page at dmaso.com/status before loading into a session. If a patch just dropped and the status shows "Updating" for Arc Raiders, wait for the green light before playing. Loading with stale offsets means features will not work or will read incorrect data — not a safety issue, but you will be playing blind for no reason.
Common Questions
Does Arc Raiders have a killcam or spectate system?
Arc Raiders does not currently have a traditional killcam, but it does have a short death replay showing the final few seconds from a top-down perspective. This replay does not show your screen or inputs, so aimbot assistance is not visible. What it does show is positioning, so avoid obviously impossible angles.
Can I use a single monitor on the attack PC?
Yes. The attack PC can be a laptop next to you, or a mini-PC tucked under the desk. It just needs to be powered on and running the loader. Many users extend their attack PC display to a small secondary monitor placed below their main screen so they can glance at the settings UI without looking away from the game. Others run it headless and set configs before each session.
Will the DMA card affect game PC performance?
No. The DMA card is a passive read-only device from the game PC's perspective. It consumes negligible PCIe bandwidth doing memory reads. You will not see any fps drop or latency increase from having it installed.
How often does the software update for Arc Raiders?
We push updates within 24 hours of major Arc Raiders patches, and typically within 4–8 hours of hotfixes. Weekly maintenance updates roll out on Tuesdays covering any accumulated offset drift. Your loader pulls updates automatically on startup so you are always on the latest build.
Does Item ESP show Arc Raiders crafting materials or just weapons?
Item ESP covers all interactable loot categories: weapons and attachments, ammunition, consumables (stims, bandages), crafting materials, and quest items. Each category has its own toggle and colour code. Most players enable weapons and quest items only, and disable ammo/consumables to reduce clutter in high-loot-density buildings.
Is there a trial before I commit to a subscription?
We do not offer a free trial for the Arc Raiders module, but our subscriptions are available on short monthly billing cycles so there is minimal commitment. Check our pricing page for current plan details.
Get full Player ESP, AI Robot ESP, Aimbot, Item ESP, and Extraction Radar — all updated weekly and completely undetected from the game PC.
Get Arc Raiders DMA →